Why Aren’t As Bad As You Think

A Step-by-Step Guide for Replacing Kitchen Faucet

As a homeowner, you should ensure that everything in your home is perfect ranging from plumbing to electrical. It is usually costly to rely on experts to keep a house up and running. There will be no need to hire experts to help if you understand some of the heating tips and DIY ideas. One of the issues in your home that you do not need an expert to resolve is the replacement of kitchen faucet. Living in a house with a damaged faucet usually lead to wastage of water because of leaking. There is no need to wait for a plumber if you can resolve the issue. If you click here, you will learn some of the vital parts of a kitchen faucet such as aerator, spout, and handle and excellent heating tips. Below, you will find everything that you need to know regarding the process of replacing a kitchen faucet and other heating tips.

In as much as you will need certain tools for the job, you can do it yourself. The first step is diving the process into two parts; removing the old faucet and installing the new one. In the removal process, you will start by closing the valves. The valves are usually located under the sink that you can easily find. As soon as you close the valves, you should turn on the faucet to get rid of the existing pressure. Always ensure that your faucet is on.

Unscrew all the nuts connecting the water lines using an adjustable wrench. When the nuts get to lose that you can turn them with your fingers, you should remove the holes from the old faucet. After that, you should completely remove the nuts from the faucet with the help of a basin wrench. In this case, you will need an extra pair of hands to hold the faucet from about the sink. Once done, remove the faucet.

In the replacement part, you should assemble the new faucet. Using the assembling manual that is provided, this will be a simple task. However, you should not careful not to damage your new faucet. Once the faucet is ready for installation, you should cover all the holes using trimming rims and deck plates. Insert all the supply tubes and link them in the right places. At this point, you will need a wrench to tighten the nuts.

In the end, you should ensure that the hoses are well connected to the water lines. Connections that are likely to leak should be wrapped with a Teflon tape. In the case of a hot-and-cold faucet, be keen on the lines to avoid any mix-ups and have some heating tips. If you follow this guide and have some heating tips in mind, you will not have to worry about hiring an expert to help with the replacement of your kitchen faucet.

Leave a Comment